16 Carving Chisels – not sure of origin or totally sure of use – maybe someone out there will recognise them?
Are they for soft stone or wood? Maybe the former. They are contained in a very precisely made teak travelling case and are marked with roman numerals They vary in length from 200 to 230 mm and in width from 4 mm to 28 mm with 4 mm square section. 8 are Gouges, the others are Chisels including 4 Bent. 3 need regrinding.
Have a look at them on our site on Woodworking Carving Chisels
carving chisels close up
chisels another close up
Carving Chisels by S.J. Addis
We have a large range of Carving Chisels by S. J. Addis & J.B. Addis in stock at the moment
7 CARVING CHISELS BY ADDIS (FOR FINE WORK)
2 mm. No. 11. S.J.
3 mm. 4 or 5 J.B. 10 Prize Medals
(sweep no. not imprinted).
3 mm. No. 7. S.J. Cast Steel.
4 mm. No. 11 S.J.
4 mm. No. 39 Vee. S.J. Cast Steel
1 mm. No. 21 Chisel. S.J.
3 mm. No. 21 Chisel. S.J
Carving Chisels by J B Addis 10 Prize Medals
Another set as follows:
6 mm. No. 30 Spoon Bit Gouge
7 mm. No. 17 Curved Gouge
3 mm. No. 11 Straight Goueg
6 mm. No. 23 Spoon Bit Chisel
4 mm. No. 26 Spoon Bit Gouge
5 mm. No. 15 Curved Gouge
Curved Gouges, Straight Gouges, Spoon Bits and Straight ‘V’s
For more details and more chisels see our site: Woodworking Carving Chisels
We are putting two Maco Templates on the site later this evening and one Temco Template
The description on the Maco Templates is
4″ (100 m) No. 2 “MACO” ADJUSTABLE TEMPLATE WITH BRASS LAMINATIONS.
MADE BY THE MACO TEMPLATE & ENGINEERING CO. LTD, ENGLAND.
One has a box and is priced at £48, the other doesn’t have a box and is priced at £38.
Prices include postage.
For more informaton see our site on the craft page
Addis Carving Chisels
Image of Addis SJ JUNr stamp
We have recently received a large consignment of
Carving Chisels by Addis. These will start to show up
on the site the week beginning 6 February.
Rounding Planes
Friday 9 September We have just put three Rounding Planes on the site.
They comprise a set of three aluminium Rounding Planes with brass bushes.
Fitted with standard Record Spokeshave blades
Good working condition.
£104 for the three including postage.
If you are interested contact us at secondhandtools.co.uk
We have recently reordered this book. The feedback we have received from people who have purchased it has been 100% happy!! At the moment we are selling it for £70. It weighs 3.75 kgs so we post it out by carrier (in the UK usually UPS) and we have had to increase the UK Zone One delivery charge to £8.50. Other areas such as The Hebrides, Northern Ireland, The Highlands etc we will have to quote for. Delivery is usually within 3 days of ordering. We will quote for any destination outside the UK.
For more details about the book please look at our website
At the moment we have the following planes going on the secondhand tools site on Sunday 21 August
Unused Lie-Nielsen No. 62 Low Angle Jack Plane
A little used Lie-Nielsen No. 9.1/2 Standard Angle Block Plane,
An unused Lie-Nielsen No. 97.1/2 Small Chisel Plane,
Lie-Nielsen Unused Plane Blades,
A Record 042 Shoulder Rabbet Plane,
A Record No. 073 Shoulder Rabbet Plane,
A Stanley No. 71 Router Plane,
A Stanley 7.1/2 Closed Throat Router Plane,
A Record No. 712 Skew Rabbet Plane
and a Stanley No. 10 Bench Rebate Plane.
also:
Stanley 605.1/2 Flat Sided Bedrock Jack Plane
A little used Record 2506 Side Rabbet Plane
An unused 1950/60s Marples B.B. Jack Plane in original Maker’s Box.
There will be other woodworking tools apart from planes which we are sorting out now
